Panasonic Windea VGDT18142W, Simple Manual

*1

                    Can be changed to alarm display. Call display flashes in red. (        

Page

 151

)

                  (Consult with the administrating company or the company that installed the system.)

*2

  "Intensity" and "estimated arrival time" do not appear if your apartment building uses simplified intensity 

display.

Installer 

Setting

㐿㍤

UNLOCK

ᓳᣥ⼊ႎ㖸஗ᱛ

㕖Ᏹ

RESET/STOP ALARM

EMERG.

FIRE CONFIRM

MENU

OFF

Ἣἴ
⏕⹺

⚳ੌ

ࡔ࠾ࡘ࡯

㔚Ḯ

POWER

⸃㍤

UNLOCK

ᓳᣥ⼊ႎ㖸஗ᱛ

㕖Ᏹ

RESET/STOP ALARM

EMERG.

FIRE CONFIRM

MENU

OFF

Ἣἴ
⏕⹺

⚳ੌ

ࡔ࠾ࡘ࡯

㔚Ḯ

POWER

Fire

Call 1

Manager’s Message

Please contact the person above.

Gas

Ventilation

Emergency

Delivery

When the Menu Button is Flashing

*

1

The Emergency Button or an Extra Emergency Button has been pressed.

Confirm the details and take appropriate measures such as informing the neighbors. The alarm sound will 
stop when you press the Stop Alarm Button, or the Emergency Button or Extra Emergency Button is reset.

●

The base unit or when you have pressed the emergency button by mistake

Press the Emergency Button again.

●

When you have pressed an Extra Emergency Button by mistake

Reset methods vary depending on the equipment used.

The call ends automatically about 1 minute after it starts.
A talk with the Building Manager Room ends 
automatically after about 4 minutes.

•

 After a beep, the call lamp lights.

Press the TALK button

1

Speak into the microphone

2

Internal call 

(Call sub-base unit)

Press the TALK button

3

The call sound plays when a call is made from the Main Entrance, Unit Entrance or Building Manager Room. 

A lamp also lights up. For Main Entrance: Talk lamp (red) and lobby lamp (red); For Unit Entrance: Talk lamp 

(yellow); For Building Manager Room: Talk lamp (red) and Manager lamp (red).   

•

 A beep is played, the call lamp on the screen 

disappears, and the call ends.

(When the call is from the Main Entrance, the 

lobby lamp also turns off.

）

(When the call is from the Building Manager 

Room, the Manager lamp also turns off.

）

•

 For how to extend the talk time, refer to Page 36.

•

 After a call, you can talk for approximately 

10 seconds without pressing the talk button.

For this time, the TALK button on the base  

unit lights in red, and the talk light (green) on 

the calling sub-base unit light up (green)

•

 After 10 seconds have elapsed, the system enters 

the calling state (talking is cut off), the TALK button 

on the called base unit flashes in red and Talk lamp 

(green) on the call sub-base unit will turn off.

3

•

 You can talk with the base unit or call sub-base 

unit from which the response was made.

* The base unit and call sub-base units from 

which no response was made will enter the 
standby state.

4

•

 The call ends automatically about 1 minute after 

it starts.

Press the Extension button

1

2

A "Beep" sound will play

For call sub-base unit

The Main Entrance will unlock. 
Once the Unlock button is pressed, 
the call will automatically end 
approximately 5 seconds later.

Stop Alarm 

Button

Emergency Button

Press this button to stop 
the alarm sound, etc.

MENU Button

*The figure indicates a typical model.

• 

If you press the MENU Button when the 

MENU Button is flashing, the MENU 

Button turns off, and a notification 

indicator appears on the screen.

• 

Indicators on the screen will disappear 

with no operation for about 3 minutes or 

longer if they are alarm indicators, or with 

no operation for about 30 seconds or 

longer if they are Notice indicators, and 

then the MENU Button will flash again.

■ 

Meanings of Major Screen Displays and Measures

Some screens do not appear depending on the equipment 

or function settings of the building of your residence.

A fire has broken out.

Check the situation and take appropriate 
measures such as prompt initial 
fire-fighting, report, or evacuation. The 
alarm sound will stop when you press the 
Stop Alarm button or the detector is reset.

Page 

146 to 147

If you do not press the TALK button to end the 

call, sounds in the room may be overheard.

A gas leak has occurred.

Shut off the main gas valve and 
open the windows and doors to 
ventilate the room. The alarm 
sound will stop when you press the 
Stop Alarm Button or gas is gone.

Alarm Display

The gas and CO Alarm has detected 

incomplete combustion (carbon monoxide).

Open the windows and doors to ventilate 

the room. Stop using the device that is 

causing the incomplete combustion. The 

alarm sound will stop when you press 

the Stop Alarm Button or incomplete 

combustion is no longer detected.

Page 

148

Page 

149

Page 

155

Page 

47

Page 

48

Page 

150

A parcel has been delivered to 

the delivery box.

Take the parcel out of the 
delivery box.

You have a message from the 

Building Manager Room.

Call the Building Manager 

Room and check on the 

message.

The call button is pressed and 

you are being called.

Check on the call and take 
appropriate measures. The call 
sound will stop when you press 
the Stop Alarm Button or the 
call button is reset.

Notice Display

Call indicator: 

flashes in yellow

When the TALK button on the base unit or 
call sub-base unit is pressed, you can talk

Press the TALK button on the base unit 
or calling sub-base unit to end the call

While talking with the caller at the Main Entrance, press the 

Unlock button flashing in green.

Note

page 

41

Talk 

(Call sub-base unit)

page 

35

* The extension adapter for your dwelling unit (VGD8210) (sold separately) is 

required to be installed on the Base Unit to connect the Call Sub-base Unit.

VOLUME

EXTENSION

UNLOCK

TALK

呼出音量

室内呼

解錠

通話

EMERG.

非常

MANAGER

VOLUME

EXTENSION

UNLOCK

TALK

管理呼

呼出音量

室内呼

解錠

通話

EMERG.

非常

Unlock

Button

Flashes when the door can be 

unlocked (luminous Unlock Button)

TALK 

button

Extension

button

Unlocking the Main Entrance

 (Luminous Unlock Button)

Page 

35

■ 

Other Screen Displays

Some screens do not appear depending on the equipment 

or function settings of the building of your residence.

Detector Activation Display

(only for VGDT product number)

Fire Dector Fault Display

Gas Detector Fault Display

Security 1 Display

Security 2 Display

Page 

146

Page 

148

Page 

149

Page 

152

Page 

153

*2

Earthquake Display

(Intensity 3 to less than intensity 5-lower)

*2

Earthquake Display

(intensity 5-lower or higher)

Earthquake Occurrence Display

(S wave sensor activated)

Earthquake Erroneous 

Report Display

*2

Earthquake Test Display

Page 

160

Page 

160

Page 

160

Page 

161

Page 

161

Elevator Stopped

Elevator Restored

Wireless equipment failure 

has occurred display

Wireless unit battery 

is dead display

Power Consumption Display

(with level indicator)

Page 

163

Page 

163

Page 

157

Page 

157

Page 

158

Power Consumption Display

(without level indicator)

Water Leak Display

General Announcement 

Display

General Purpose 

Alarm Display

Emergency Announcement 

Display

Page 

158

Page 

156

Page 

159

Page 

51

Page 

51

Fire Detector Activated

Breakout Of Fire

→

Fire Confirm Button 

To Cancel

→

Alarm Stop Button

Earthquake Alarm

Intensity 3

in 60 sec.

Earthquake Alarm

Intensity 5-lower

in 60 sec.

Earthquake Alarm

Intensity 6-lower

in 30 sec.

Test

Earthquake

Water Leakage

Alarm 1

General Announcement

Emergency Announcement

The earthquake alarm 

from a moment

ago was an error.

Fire Dector 

Fault

Elevator Restored

Wireless unit battery is dead

Too much electricity is being used.

Elevator Stopped

Gas Detector 

Fault

Security 1

Security 2

20 40

60 80

100

Power Consumption

(

%

)

Wireless equipment failure 

has occurred.

Too much electricity 

is being used.