–
When an alarm is detected (“Alarm”)
•
Default:
Off
Destination of notification
[Address 1] - [Address 4]
Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.
•
[Alarm] checkbox:
When the checkbox is selected, the E-mail notification will be sent when an alarm
occurs or when a video loss is recovered.
•
[Destination E-mail address]:
Enter the destination E-mail address.
–
Available number of characters:
3 - 128 characters
–
Available characters:
Alphanumeric characters, the at sign (@), the period (.), the underscore (_),
and the hyphen (-).
–
Default:
None (blank)
To delete the registered address, click the [Delete] button respective to the desired address.
[E-mail subject]
Enter the E-mail subject.
•
Available number of characters:
0 - 50 characters
•
Default:
None (blank)
[E-mail body]
Enter the E-mail body.
•
Available number of characters:
0 - 200 characters
•
Default:
None (blank)
10.5 Configure the settings relating to Panasonic
alarm protocol [Notification]
Click the [Notification] tab on the “Alarm” page. (
®
page 21, page 23)
Operating Instructions
53
10 Configure the alarm settings [Alarm]
