The description below is the configuration of the priority stream that can transmit images without deteriorating
the image quality and refresh interval even when multiple users access concurrently.
Priority stream
[Activation]
Select “On” or “Off” to determine whether or not to use the priority stream.
•
Default:
Off
Note
•
When “On” is selected for “Activation” of “Priority stream”, number of users who can access the camera
may be limited.
[Destination IP address(1)]
Enter the first destination IP address.
•
Default:
None (blank)
[Destination IP address(2)]
Enter the second destination IP address.
•
Default:
None (blank)
[Stream type]
Select either “JPEG”, “H.264(1)” or “H.264(2)”.
•
JPEG:
JPEG images will be transmitted.
•
H.264(1):
H.264(1) images will be transmitted.
•
H.264(2):
H.264(2) images will be transmitted.
•
Default:
JPEG
Note
•
When “Best effort” is selected for “Transmission priority” of “H.264”, bit rate will vary between the
maximum and minimum rates while images are being transmitted.
[Refresh interval*]
Select the refresh interval from the following.
This setting is validated only when “JPEG” is selected for “Stream type”.
NTSC:
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps/ 2fps/ 3fps/ 5fps/ 6fps */ 10fps */ 15fps */ 30fps *
PAL:
0.08fps/ 0.17fps/ 0.28fps/ 0.42fps/ 1fps/ 2.1fps/ 3.1fps/ 4.2fps/ 5fps */ 8.3fps */ 12.5fps */ 25fps *
•
Default:
1fps
Operating Instructions
59
11 Configure the settings relating to the authentication [User mng.]
