•
When using the server certificate:
In advance, install the root certificate and intermediate certificate on the browser in use. Follow the
instructions of CA for how to obtain and install these certificates.
•
When the unit is accessed using the HTTPS protocol, the refresh interval and frame rate of images
may be lower.
•
When the unit is accessed using the HTTPS protocol, it may take time to display images.
•
When the unit is accessed using the HTTPS protocol, the images may be distorted.
•
When the unit is accessed using the HTTPS protocol, the number of users that can access the unit
may be reduced. The maximum number of concurrent access user varies depending on the maximum
image size and transmission format.
13.3 Access the unit using the HTTPS protocol
1.
Start up the web browser.
2.
Enter the IP address of the unit in the address box of the browser.
•
Example of entry:
https://192.168.0.10/
IMPORTANT
•
When the HTTPS port number is changed from “443”, enter “https://IP address of the unit + : (colon)
+ port number” in the address box of the browser.
(
Example:
https://192.168.0.11:61443)
•
When the unit is in a local network, configure the proxy server setting of the web browser (under
[Internet Options...] under [Tools] of the menu bar) to bypass the proxy server for the local address.
3.
Press the [Enter] key on the keyboard.
→
The “Live” page will be displayed.
When the security alert window is displayed, install the security certificate. (
®
page 82 - page 88)
When “On” is selected for “User auth.”, the authentication window will be displayed before displaying
live images for the user name and password entries.
IMPORTANT
•
When the unit is accessed using the HTTPS protocol, the refresh interval and frame rate of images
may be lower.
13.3.1 Install the security certificate
When the security certificate of the unit to access is not installed on the PC, the security alert window will be
displayed each time the unit is accessed using the HTTPS protocol. To have the security alert window not
displayed, it is necessary to install the security certificate in the following procedure. If the certificate is not
installed, the alert window will be displayed each time the unit is accessed.
Note
•
The security certificate is installed on the PC with the information registered for “Common Name”.
Therefore, the information registered for “Common Name” must be same as the address or host name
for the unit access. If the certificate is not the same, the security alert window will be displayed each
time the unit is accessed.
•
When the address or host name of the unit is changed, the security alert window will be displayed each
time the unit is accessed even if the security certificate is installed. Install the security certificate again.
•
When the unit access is open to the Internet, enter the address name or host name to access via the
Internet for “Common Name”. In this case, the security alert window will be displayed each time the
unit is locally accessed, even if the security certificate is installed.
Operating Instructions
81
13 Configuring the network settings [Network]
