background image

76

DVD DRIVE SETUP

The procedures described below let you select the DVD
Drive function when the specified DVD drive is installed in
the system.

1. Move the cursor to DVD on the WJ-HD500 SETUP menu

by pressing the 

C

or 

D

button, then press the 

SET

but-

ton.
The DVD menu shown below appears on the monitor
screen.

2. Select an item or item parameter on the menu by press-

ing the 

D

or 

C

button.

3. To return to the previous setup menu, press the

SETUP/ESC

button.

DVD Format

Refer to PREPARATIONS for details.

Alarm Recording Backup

The alarm images recorded by the disk recorder can be
automatically stored (back up) on the DVD-RAM disk by
copying the records programmed in advance.
The procedures described below let you enable or disable
this function (alarm backup) on the DVD-RAM disk.

1. Move the cursor to AUTO COPY(EVENT) on the DVD

menu by pressing the 

C

or 

D

button

2. Select either OFF or ON by pressing the 

+

or 

-

but-

ton, then press the 

SET

button.

OFF:

Disables alarm data backup.

ON:

Enables alarm data backup.

The factory default setting is OFF.

The AUTO COPY(EVENT) menu shown below appears
on the monitor.

3. Move the cursor to the appropriate COPY column by

pressing the 

D

C

A

or 

B

button, then select either

mode for a camera by pressing the 

+

or 

-

button.

OFF:

Disables camera alarm backup.

ON:

Enables camera alarm backup.

4. Repeat the above step 3 to program the settings for

other cameras.

5. After completing the settings, press the 

SETUP/ESC

button to return to the previous DVD menu.

Notes:

• Selecting ON for AUTO COPY(EVENT) will enable

manual or automatic alarm data backup for the
specified cameras.
However, Timer Recording is required to program
additional timer settings.
Refer to AUTO COPY on the Program Timer menu
for details on the selected recording method.

• The following operations will be disabled by AUTO

COPY(EVENT) ON.

Formatting the DVD-RAM disk
Displaying DVD-RAM disk recording list
Playing back DVD-RAM disk recording list

To enable the above functions, set the parameter to
OFF.

10 DVD

DVD FORMAT

*AUTO COPY(EVENT)        OFF
AUTO COPY(EMERGENCY)     OFF

DVD DISKEND              STOP
DVD FULL                 1%

10-2 AUTO COPY(EVENT)

 CAM COPY      CAM COPY
   1  OFF        9  OFF
   2  OFF       10  OFF
   3  OFF       11  OFF
   4  OFF       12  OFF
   5  OFF       13  OFF
   6  OFF       14  OFF
   7  OFF       15  OFF
   8  OFF       16  OFF

Summary of Contents for WJ-HD500B









































































































Reviews: