24
Channel Information ("Channel Info")
In the "Channel Info" area, the channel name, the set recording duration at an alarm occurrence, and the alarm
recording set button will be displayed. The recorder can be inserted into the system, updated, or deleted.
Select the icon
of the desired channel to be updated and click the [Update] button.
"Name":
Enter the channel name to be used in the system.
Note:
The same channel name cannot be used for the channels of the same recorder.
"Rec. Duration":
The default is "10 Sec". Available duration is "10" - "999" sec.
When an alarm occurs in the channel, the WJ-HD88 monitoring system will start recording from the respec-
tive channel automatically for the set recording duration. However, when the motion detector function is acti-
vated or when the video signal is lost, this alarm recording will not be carried out.
Note:
The alarm recording images will be saved in the same folder in which the monitoring system is installed.
"Alarm Recording":
Click the [Update] button and then click the [Set] button. The channel selection for the
alarm recording window will be displayed.
Select the channels to which the alarm recording is to be applied and click the [OK] button. When an alarm occurs in
the selected channel, alarm recording will automatically start and alarm buzzer will sound.