Panasonic WJ-HDB502, User Manual

23

FINE:

For fine image quality (Compression Rate 1/10)

NORMAL:

For normal image quality (Compression Rate

1/16)

EXTENDED:

For extended time recording quality

(Compression Rate 1/25)

The factory default setting is SUPER FINE.

3. Select a number of freeze images to be recorded by

clicking the pulldown list.

4 to 60:

Records the selected number of freeze images

for One Shot Recording.

The factory default setting is 16.

4. Click the 

[SET]

button to execute the selections.

5. Click the PROG

✽

SETUP display in the underneath of

the window to return to the previous program number
window.

■

Emergency Recording (Time
Lapse Recording)

The Emergency Recording is given priority to record all
video inputs in Time Lapse Recording reacting to a signal
input form the CONTROL port on the Disk Recorder.
These items let you determine the recording parameters for
Time Lapse Recording when the input signal is received
from pin 21 of the CONTROL port located on the rear of the
Disk Recorder.

1. Select either audio recording function by clicking the

pulldown list for EMERGENCY in the WJ-HD500 SETUP
MENU window.

W/OUT AUDIO:

Enables Emergency Recording without

audio.

WITH AUDIO:

Enables Emergency Recording with

audio.

The factory default setting is W/OUT AUDIO.

2. Click the EMERGENCY display in the WJ-HD500

SETUP MENU window.
The selected EMERGENCY REC SETUP window as
shown in the figure will appear on the display.

3. Select a recording time mode by clicking the pulldown

list.

SF-

✽✽

H:

Selects the recording time mode in enhanced

fine quality.

FQ-

✽✽

H:

Selects the recording time mode in fine quali-

ty.

NQ-

✽✽

H:

Selects the recording time mode in normal

quality.

EX-

✽✽

H:

Selects the recording time mode in extended

time quality.

SP:

Freely selectable

✽✽

indicates the hours for recording time mode:

2, 12, 18, 24, 48, 72, 96, 120, 180, 240, 360, 480, 720,
960, 1200, 1440, 2160, 2880, 3600, 4320, 6480, 8640 
When the parameter SF/FQ/NQ/EX is selected for
recording mode, the recording rate and quality are
automatically set according to the selected recording
time mode.

Note:

It may not possible to set the recording time,

depending on the remaining storage capacity of the
hard disk.

The factory default setting is SF-24H.

4. If the parameter SP is selected for the recording mode,

select a recording rate by clicking the pulldown list.

1 - 30fps:

Records the selected number of freeze

images every second.

0.5fps:

Records a freeze image every 2 seconds.

0.4fps:

Records a freeze image every 2.5 seconds.

0.3fps:

Records a freeze image every 3.3 seconds.

0.2fps:

Records a freeze image every 5 seconds.

0.1fps:

Records a freeze image every 10 seconds.

• 30fps is the active selection when the FIELD/

FRAME parameter in the COMMON SETUP menu is
set to FIELD.

• 15 fps is the active selection when the FIELD/

FRAME parameter in the COMMON SETUP menu is
set to FIELD or FRAME 3DIM OFF.