47
Highlight “Use Ignoring Time” and press the button to toggle between On and Off. When set to On, the
recorder will ignore video blind events occurred during the preset period. Highlighting “Time Setup…” and
press the button allows you to set up event ignoring time.
Note: The record action for motion events will not be affected by the Video Blind ignoring function.
Highlight the “Actions 1” and “Actions 2” tabs and the Video Blind Actions 1 and Actions 2 screens display.
The recorder can be set to react to video blind
differently for each camera. Each camera can be
associated with another camera, trigger an Alarm
Output Terminal, sound the recorder’s internal buzzer,
notify a number of different devices, move PTZ
cameras to preset positions, and/or display a camera
on a Spot monitor.
Highlight the box under the “Record” heading and
press the button. A list of cameras appears. You
can associate as many cameras with that camera as
you wish. If the recorder detects video blind on the
selected camera, it starts recording video from all the
associated cameras.
Figure 75 : Video Blind - Actions 1 screen
Note: For the Record action, the camera you select should be set to the Event or Time & Event
recording mode in the Schedule screen.
Highlight the box under the “Alarm-Out” heading and press the button. A list of Alarm Outputs appears.
You can associate as many Alarm-Outs with that camera as you wish. When the recorder detects video blind
on the selected camera, it will trigger output signals on all the associated Alarm Output Terminals. You can
also have the recorder’s internal buzzer sound if video is lost on the selected camera.
Note: For the Alarm-Out action, the alarm output and beep you select should be set to the Event
mode in the Alarm-Out Schedule setup screen..
Highlight the box under the “Notify” heading and press the button. You can toggle the entire list On and
Off by highlighting “Notification” and pressing the button. You can toggle the individual items On and Off
by highlighting that item and pressing the button. Highlight “OK” and press the button to accept your
changes.
Highlight the desired box under the “PTZ” heading, and
press the button. A list of PTZ presets appears.
Select the preset position for each PTZ camera, where
you want PTZ cameras to move to when the recorder
detects video blind on the selected camera’s input.
Highlight the box under the “Spot Monitor” heading and
press the button. A list of Spot monitors and
cameras appears. Each Spot monitor can be
associated with a camera. The recorder will display the
associated camera on the Spot monitor whenever it
detects video blind on the selected camera.
Figure 76 : Video Blind - Actions 2 screen
You can save your Video Blind changes by highlighting “Save” and pressing the button. Selecting
“Cancel” exits the screen without saving the changes.
Summary of Contents for WJ-HL204/G
Page 77: ...76 Map of Screens ...
