74
Figure 93: Clip-Copy screen
You can search video from the first to last recorded images, or you can set the start and stop times and dates.
Highlight the box beside “From” and press the (Play/Pause) button to toggle between On and Off. When
set to Off, you can enter a specific Date and Time. When set to On, the search will be from the first recorded
image. When highlighting “ ” and pressing the button the bookmark list displays and the bookmark point
you selected will be the starting date and time.
Highlight the box beside “To” and press the button to toggle between On and Off. When set to Off, you can
enter a specific Date and Time. When set to On, the search will be from the last recorded image. When
highlighting “ ” and pressing the button the bookmark list displays and the bookmark point you selected
will be the ending date and time.
Highlight the box beside “Channels” and press the button. You can select the cameras that you would like
to include in your video clip.
Highlight the box beside “Password” and press the button. A virtual keyboard appears allowing you to enter
the password for reviewing the video clips.
Highlight the box beside “Dest.” and press the button. You can select the storage device on which you
would like to record the video clip.
Important: The USB device for clip copy must be FAT16 or FAT32 format.
Note: The flash drive protected with password is not supported.
Please be aware that when copying video clip, it may consume extremely long time in
calculating for copy process. It depends on the video clip size required for copy.
The recorder automatically assigns a file name to the video clip. However, you can give the video clip file a
different name. Highlight the box beside “File Name” and press the button. A virtual keyboard appears.
Enter a file name for the video you are backing up and select “Close”. The recorder will automatically add the
camera number (for example “01”) and “.exe” to the file name.
Note: When naming a file, you cannot use the following characters: \, /, :, *, ?, “, <, >, |, !, $, %, ;, ‘,
(space).
Highlight “Include Text-In Data” and press the button. This will toggle between On and Off. When this
feature is On, you can include text-in data when copying video if the video was recorded with text-in data.
Highlight “Use Site Info” and press the button. This will toggle between On and Off. When this feature is
On, you can add the site information to the file name for the video you are backing up.
Note: When the site information is added to the file name, some special characters (\, /, :, *, ?, “, <, >, |,
!, $, %, ;, ‘, (space)) in the site information will be converted to “_”.
Once you have given the video clip a file name, highlight the “Start” button and press the button. The
confirmation screen displaying data size will appear. When the storage device does not have enough space,
the recorder will ask if you want to copy as much of the video clip as possible in the available space. Highlight
the “Continue” button and press the button to continue clip copy.