48
■
FTP transmission by periodic timer
Select "On" or "Off" (default) to determine whether or
not to send images to the FTP server periodically.
When "On" is selected, configure the settings on the
"FTP" page. (Page 58)
■
FTP image transmission by alarm
Select "On" or "Off" (default) to determine whether or
not to send images from an alarm camera to the FTP
server at an event occurrence.
When "On" is selected, configure the settings on the
"FTP" page. (Page 58)
■
Alarm message*
3
Select "On" (default) or "Off" to determine whether or
not to display the pop-up window that notify of an
event occurrence with a message on a PC for manage-
ment.
■
Panasonic alarm protocol*
3
Select "On" or "Off" (default) to determine whether or
not to notify of an event occurrence to a PC.
Note:
• Refer to page 69 for further information on how to
set destination addresses.
• The dedicated software*
2
is required for a PC to dis-
play received information.
■
Alarm mail*
3
Select "On" or "Off" (default) to determine whether or
not to send an alarm mail at an event occurrence.
Refer to page 60 for information on how to configure
the settings to use the mail function such as the set-
tings of the mail server address and the destination mail
addresses. Refer to page 93 for further information
about contents of the alarm mail.
*1 The end time should be at least 15 minutes later
than the start time.
*2 Refer to the "readme.txt" on the provided CD-ROM
about the dedicated software.
*3 Even when "Off" is selected, the alarm message
display, Panasonic alarm protocol notification and
alarm mail notification will be performed at error
occurrence.
External recording
It is possible to start and stop recording using the con-
nected external switch. To record using the external
switch, it is necessary to assign a program to a time
zone when the external switch is to be used.
Refer to the installation guide for further information on
how to connect an external switch.
When two or more recording schedules (Mon - Sun,
Daily, Ext.) are overlapped, the priorities of the record-
ing schedules are as follows.
Ext. > Mon - Sun > Daily
Important:
• Recording will not be performed even when the
external switch is turned on if it is in the time range
which no program is assigned. It is recommended
to set the time range of the program for the external
recording longer.
Special days
The timetables of a day of the week can be assigned to
special days. Time tables for special days can be set
for up to 30 days.
When two or more recording schedules (Mon - Sun,
Daily, Ext., Special day) are overlapped, the priorities of
the recording schedules are as follows.
Ext. > Special day > Mon - Sun > Daily
1
Click the [Schedule] button.
2
Click the [Special day] tab.
The "Special day setup" page will be displayed.
3
Select date and the day of the week to be set as
special day.
4
Click the [Set] button.