118
119
Initial position setup
Tilting degree adjustment, vertical angle adjustment, horizontal adjustment of image clipping position can be
performed. For further information about this function, refer to the operating instructions of the camera in use.
Step 1
Click the [Setup] button.
The initial position setup window will be dis-
→
→
played.
Step 2
Adjust the position using the buttons or by clicking on
the image.
Step 3
Click the [Set] button.
The adjusted position will be saved on the cam-
→
→
era.
Step 4
Click the [Back] button.
The screen will return to the camera setting page.
→
→
