24
25
Set up OSD [Display Title]
Determine whether to display the title and select the title to display for each camera, the settings will be
changed after the settings have been transmitted to the camera.
Clicking the [Setup >] button for "Display Title" on the [Camera setup] tab will display the following items.
■
Setting items
[Display]
Select whether or not to display the title on camera
images. If title display is activated, the title will be dis-
played on camera images and will also be recorded
with the recorded images.
To transmit the settings to the camera, mark this
item, and select either of the following.
On: Title displayed
Off: Title not displayed
[Display Title]
To transmit the settings to the camera, mark this
item, and edit the title displayed on the image. Click-
ing the [Edit >] button will display the following title
editing window:
[Display Title]
•
Enter a character string to be displayed on the
image using the on-screen keyboard. (
☞
Page 10)
(Up to 16 alphanumeric characters)
Available characters: 0-9, A-Z, ! # $ % ( )* + , - . / :
; = ?
[Camera title]
•
Display the camera title registered on the [Main
monitor] tab of the monitor page (
☞
page 49).
[Copy] button
•
The camera title registered on the [Main monitor]
tab of the monitor page can be used as display
title. Clicking this button will copy the camera title
to the "Display Title" field.
[Back] button
•
Click the button after completing the settings.
This will close the window.
■
Camera Selection
Select the camera to which the setting of the "Display
title" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Display title" to the cam-
era.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
