34
35
Set the back light compensation function of the camera [Back light compensation
(BLC)]
Determine whether to enable the back light compensation function for each camera. The settings will be
changed after the settings have been transmitted to the camera.
Clicking the [Setup >] button for "Back light compensation (BLC)" on the [Camera setup] tab will display the
setup window.
[Back light compensation (BLC)]
When "On" is selected for "Super Dynamic", this
function is not available.
The back light compensation function masks the
brighter area in image and compensates exposure in
silhouette created by back light.
On: Mask area will automatically be set.
Off: Mask area will not be set automatically. It is
necessary to set mask areas manually.
■
Camera Selection
Select the camera to which the setting of the "Back
light compensation (BLC)" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Back light compensation
(BLC)" to the camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
