48
49
Configure the advanced settings for recording and events [Advanced setup]
Configure the special settings related to recording on this tab. Set up the recording mode, alarm disarm dura-
tion and Panasonic alarm port number (the port number for incoming site alarm).
[Recording mode]
Determine whether or not to stop all recording
actions. Set to "Off", primarily to stop access to the
HDD before turning off the power.
On: Performs recording.
Off: Stops all recording actions.
Default:
On
Important:
If "Off" is selected, be sure to return the setting to
•
"On" when resuming operation.
[Alarm disarm duration]
Set the period to suspend event actions for the case
that the same kind of event (terminal alarm, camera
site alarm, command alarm, face matching alarm)
occurs repeatedly at the same camera.
2 s/ 3 s/ 5 s/ 10 s
Default:
2 s
[Panasonic alarm port number]
Specify the number of the port to be used for receiv-
ing site alarm.
Default:
1818
Note:
Enter the port number in five digits, right aligned.
•
(Example: When the port number is 80, enter
"00080".) The leading zeros are omitted here.
