58
59
Configure the settings relating to the user
management [User management]
The settings such as user authentication On/Off, administrator registration and operation levels can be config-
ured on the setup menu - the "Advanced setup" menu - the "User management" page.
The "User management" page has [Basic], [User registration] and [Administrator setup] tabs.
Configure the basic settings relating to user management
[Basic]
The settings relating to login when using the mouse, user authentication for network operations, and user levels
can be configured on this tab.
■
Operation
Configure the settings to enable auto login when turn-
ing on the recorder.
[Auto login]
Select "On" or "Off" to determine whether or not to
activate the auto login function.
On: Logs in to the recorder automatically.
Off: Does not log in to the recorder automatically.
Login is required when operating the recorder
from the logout status.
Default:
On
[Auto login user]
When "On" is selected for "Auto login", the users reg-
istered as auto login users in this setting can log in to
the recorder automatically. An auto login user should
be one of the users registered in the recorder.
Default:
ADMIN
[Quick login]
Select "On" or "Off" to determine whether to enter or
select the user name.
Off: User name needs to be entered.
On: Log in by selecting a displayed user name.
Default:
Off
[Auto logout]
Set the time to wait until auto logout when no opera-
tions are made while displaying live images.
Off: Does not logout to the recorder automati-
cally.
After 1 min/ After 3 mins/ After 5 mins/
After 30 mins
Default:
Off
Note:
When "On" is selected for "Auto login", the user
•
will not be logged out automatically even if other
values than "Off" is selected for "Auto logout".
When logout is performed (
☞
page 101), login will
be automatically performed by the user registered
in "Auto login user".
To prevent inappropriate operations, it is recom-
•
mended to select settings other than "Off" for
"Auto logout".
■
Network
Determine whether or not to require user authentica-
tion for operating the recorder from a PC.
[User authentication]
Select "On" or "Off" to determine whether or not to
authenticate the user.
On: Login followed by user authentication
Off: Login without user authentication
Default:
On
■
User level settings
Set up the operations allowed at each user level
(administrator/manager/operator/viewer) by marking
the respective checkboxes. To stop a user from oper-
ating certain functions, do not check the respective
function. The setting for the administrator cannot be
changed. The system can also be set up to allow only
live operation (image switching) after logout.
