68
69
[Load data (from SD card)]
Loads the setting data saved in an SD memory card
on the recorder. Click the [Execute >] button to dis-
play confirmation window to start loading.
[Save face data (to SD card)]
Saves the face matching data on the SD memory
card. Click the [Execute >] button to display the con-
firmation window to start saving. (When the license of
the additional business intelligence kit is registered)
[Load face data (from SD card)]
Loads the face matching data saved in an SD mem-
ory card on the recorder. Click the [Execute >] button
to display confirmation window to start loading.
(When the license of the additional business intelli-
gence kit is registered)
[Firmware update]
Updates the software saved on an SD memory card
to the recorder to upgrade the firmware.
Click the [Execute >] button to display the confirma-
tion window to start initializing.
Only an administrator can execute the firmware
update.
Note:
Contact your dealer for further information about
•
the firmware update.
[Other]
The page to save the maintenance data will open.
(
☞
Page 70)
Register the licenses for the recorder and the Additional
Camera Kit [Registration Key]
The licenses to operate the recorder and activate the extra functions are registered. The license that covers 9
cameras to use is provided with this product at the point of purchase. By registering licenses of the additional
camera kit, number of the available cameras will increase to 16, 24 or 32.
To register the options, the "Registration Key" that can be obtained from the Key Management System is
required. Refer to the provided "Activation Key Card" to obtain the "Registration Key" of this product. Refer to
the "Activation Key Card" of the additional camera kit (WJ-NVE30, WJ-NVE30W) for how to obtain the "Regis-
tration Key" to add cameras.
Important:
After registering the "Registration Key" for the recorder or that for the Additional Business Intelligence Kit,
•
be sure to click the [Restart] button to reboot the recorder. The license will not be effective before the
recorder is rebooted.
When the Registration Key of this product is registered
•
When the registration key of the additional camera kit or any other additional/extension kit is registered
•
The added cameras shall be registered on "Easy start" (
•
☞
page 12) . Each setting value is the default.
Configure each setting according to your needs.
[Entry information of the key management sys-
tem]
This is the ID number required to obtain the "Regis-
tration Key". The Activation Key Card provided with
the recorder describes how to access the key man-
agement system.
[Registration of license]
Register the "Registration Key" to operate the
recorder and activate the extra functions.
