26
Step 2
Set the date & time.
[Date]
Set the current date. Select the year and month using the
buttons of the calendar and click the date.
[<<Y]/[Y>>] button:
Selects the previous or next year.
[<M]/[M>] button:
Selects the previous or next month.
[Time]
Set the current time.
Step 3
Click the [Apply] button after setting the date & time.
→
The second will be set to "00".
[Set time zone]
Select your time zone.
GMT-12:00 - GMT+13:00
Default:
GMT
Marking the checkbox for [Activate the Daylight saving time
setting] will active daylight saving time.
The minimum settings required to operate the recorder, such as the date & time, camera registration, recording, can be
configured on the setup menu - the "Quick setup" menu - "Easy Start".
First, configure the minimum settings on "Easy Start", and to configure more advanced settings, go to each setup page.
Available settings on "Easy Start"
Step 1
Click the [Easy Start] button on the top screen of the
setup menu.
Refer to "Basic operations" (
☞
Page 7) for how to display
the setup menu.
→
The setup menu for the date & time will be displayed.
• Date & time of the recorder
• Camera registration
• Order change of the registered camera numbers
• Recording frame rate, image quality Smart coding (GOP
control) and audio
* Other settings will remain default or will be conformed to the camera settings.
* To apply 25, 50 or 60 ips for the recording frame rate, configure on the advanced recording setup (for each camera) on the
"Recording setup" tab under "REC & event" of "Basic setup", but not on Easy Start.
* To reset the time, do not use "Easy Start", and go to "Basic setup" menu - "Date/Language" page.
Important:
• Connect 4 or less cameras for registration. If 5 or more cameras are connected via a PoE hub or the like, refer to "Detect
cameras for registration [Detect cameras]" (
☞
Operating Instructions (PDF)).
• Only Panasonic cameras compatible with the recorder can be registered. Refer to "readme.txt" on the CD-ROM included in
the recorder for compatible cameras.
• If you are using a non-Panasonic camera with an ONVIF connection, it is not possible to start operation just with Easy Start.
Set up the date & time, a static IP address, the user name/password, etc. on the camera side in advance, or register the
camera with the recorder by detecting the camera or changing the registration information from [Basic setup] - [Camera] -
[Camera registration].
6
Configure the minimum settings [Easy Start]
