background image

2

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulat-
ed "dangerous voltage" within the prod-
uct's enclosure that may be of sufficient 
magnitude to constitute a risk of electric 
shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

 DO NOT REMOVE COVER (OR BACK).

 NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

Before attempting to connect or operate this product, please 
read the label on the bottom.

The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

Power disconnection. Unit with or without ON-OFF switches 
have power supplied to the unit whenever the power cord is 
inserted into the power source; however, the unit is opera-
tional only when the ON-OFF switch is in the ON position. 
Unplug the power cord to disconnect the main power for all 
units.

WARNING:

• This apparatus must be earthed.
• Apparatus shall be connected to a main socket outlet with a 

protective earthing connection.

• The mains plug or an appliance coupler shall remain readily 

operable.

• To prevent fire or electric shock hazard, do not expose this 

apparatus to rain or moisture.

• The apparatus should not be exposed to dripping or splash-

ing and that no objects filled with liquids, such as vases, 
should be placed on the apparatus.

• All work related to the installation of this product should be 

made by qualified service personnel or system installers.

• For PERMANENTLY CONNECTED APPARATUS provided nei-

ther with an all-pole MAINS SWITCH nor an all-all pole circuit 
breaker, the installation shall be carried out in accordance 
with all applicable installation rules.

• The connections should comply with local electrical code.

CAN ICES-3(A)/NMB-3(A)

For Canada

The model number and serial number of this product may 
be found on the surface of the unit.
You should note the model number and serial number of 
this unit in the space provided and retain this book as a 
permanent record of your purchase to aid identification in 
the event of theft.

  Model No. 

  Serial No.

For U.S.A.

NOTE: This equipment has been tested and found to com-

ply with the limits for a Class A digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference 

when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in 

accordance with the instruction manual, may cause harm-

ful interference to radio communications.

Operation of this equipment in a residential area is likely to 

cause harmful interference in which case the user will be 

required to correct the interference at his own expense.

FCC Caution: To assure continued compliance, (example - 

use only shielded interface cables when connecting to 

computer or peripheral devices). Any changes or modifi-

cations not expressly approved by the party responsible 

for compliance could void the user's authority to operate 

this equipment.

For U.S.A.

UL listed model No.:
WJ-NX400K

For U.S. and Canada:
WJ-NX400K
For Europe and other countries:
WJ-NX400K/G

Safety Information

In 

English

: “The equipment must be connected to an earthed 

mains socket-outlet”.
In 

Danish

: “Apparatets stikprop skal tilsluttes en stikkontakt 

med jord, som giver forbindelse til stikproppens jord”.
In 

Finnish

: “Laite on liitettävä suojakoskettimilla varustettuun 

pistorasiaan”.
In 

Norwegian

: “Apparatet må tilkoples jordet stikkontakt”.

In 

Swedish

: “Apparaten skall anslutas till jordat uttag”.

For Denmark, Finland, Norway, Sweden

: Alternating current symbol

Summary of Contents for WJ-NX400K































Reviews: