manualshive.com logo in svg

Panasonic WJ-SX 150A, Operating Instructions Manual

The Panasonic WJ-SX 150A, a superior security system, offers advanced features for optimal performance. Ensure effortless operation with the comprehensive Operating Instructions Manual available for free download from 88.208.23.73:8080. Take control of the product and maximize its potential, easily accessing the manual anytime, anywhere.

Share
Download
background image

88

ON:

The alarm-associated sequence/spot image is dis-

played on a monitor, and alarm recording will start
(if a recorder is connected to the unit).

REC ONLY:

Only an alarm recording will start and

monitors will keep displaying the current sequence/
spot images.

Note:

You cannot recover alarm-related operations

from system controllers when REC ONLY is
selected.

OFF:

An alarm input is accepted neither via the CAM-

ERA IN connectors nor the RS-485 ports.

The factory default setting is OFF.

Alarm Port

This stands for that an alarm input is accepted via the
ALARM port (25-pin D-sub connector) at the rear panel.

ON:

The alarm-associated sequence/spot image is dis-

played on a monitor, and alarm recording will start
(if a recorder is connected to the unit).

REC ONLY:

Only an alarm recording will start and

monitors will keep displaying the current sequence/
spot images.

Note:

You cannot recover alarm-related operations

from system controllers when REC ONLY is
selected.

OFF:

An alarm input is not accepted via the ALARM

port.

The factory default setting is ON.

Serial Port

This stands for that an alarm input is accepted via the
SERIAL port.

ON:

The alarm-associated sequence/spot image is dis-

played on a monitor, and alarm recording will start
(if a recorder is connected to the unit).

REC ONLY:

Only an alarm recording will start and

monitors will keep displaying the current sequence/
spot images.

Note:

You cannot recover alarm-related operations

from system controllers when REC ONLY is
selected.

OFF:

An alarm input is not accepted via the SERIAL

port.

The factory default setting is ON.

■

Alarm Mode

This window configures the operation parameters when an
alarm signal is input: an alarm mode, auto reset time and
alarm input. 

●

How to Display

To display this window, click on the 

(Alarm Mode) but-

ton in the main window (p. 80).

●

Parameters

• Alarm Mode

Checking on the box of the desired alarm mode.

OFF:

The system operation does not change into any

other mode.

Sequence Mode:

Camera images are displayed on the

monitor in either the spot mode or tour sequence.
When more than one alarm are input, the image
associated to each alarm is displayed in the
sequence mode.

Note:

Click on the Dwell drop-down menu to select

the dwell time.

Hold Mode:

Camera images are displayed on the mon-

itor in either the spot mode or tour sequence.  Even
more than one alarm are input, the image associat-
ed to the initial alarm is continuously displayed.

Notes:

• The alarm mode is activated when alarm input signals

are assigned to the same monitor through 420 ALARM
EVENT or the Alarm Event (refer to pp. 67 and 68/ p.
89) window.

• While alarm is activated, you cannot operate the func-

tions related to the Multiplexer board.

• Alarm Input Group

Select the alarm input to be accepted. Multiple Selection is
available.

Camera

This stands for that an alarm input is accepted via the
CAMERA IN connectors or the RS-485 ports.

Summary of Contents for WJ-SX 150A





























































































































































































































Reviews:

No comments

Related manuals for WJ-SX 150A

D-Link xStack User Manual preview
xStack
Brand: D-Link Pages: 357
Panasonic KX-T206E Product Description preview
KX-T206E
Brand: Panasonic Pages: 20
Panasonic PN28240i-ID Operation Manual preview
PN28240i-ID
Brand: Panasonic Pages: 281
IBM E12 Quick Installation Manual preview
E12
Brand: IBM Pages: 2
Radial Engineering SW8 Owner'S Manual preview
SW8
Brand: Radial Engineering Pages: 12
Oehlbach UltraHD Switch 3:1 User Manual preview
UltraHD Switch 3:1
Brand: Oehlbach Pages: 20
Accton Technology ES4626 Management Manual preview
ES4626
Brand: Accton Technology Pages: 523
CYP OR-44VWC Operation Manual preview
OR-44VWC
Brand: CYP Pages: 28
G&D DVIMUX8-USB Installation And Operation Manual preview
DVIMUX8-USB
Brand: G&D Pages: 80
Velleman VAS4 User Manual preview
VAS4
Brand: Velleman Pages: 8
KBT TPR22-BM Series Installation And Operating Manual preview
TPR22-BM Series
Brand: KBT Pages: 4
Kathrein EXE 1512 Manual preview
EXE 1512
Brand: Kathrein Pages: 41
ATEN VM7104 Quick Start Manual preview
VM7104
Brand: ATEN Pages: 2
ATEN CS-102U User Manual preview
CS-102U
Brand: ATEN Pages: 15
Tripp Lite B004-008 Owner'S Manual preview
B004-008
Brand: Tripp Lite Pages: 9
Dahua D-PFS4226-24ET-240 Quick Start Manual preview
D-PFS4226-24ET-240
Brand: Dahua Pages: 16
AMX Solecis AVS-SL-PR-0201-0301 Operation/Reference Manual preview
Solecis AVS-SL-PR-0201-0301
Brand: AMX Pages: 24
PCB Piezotronics IMI SENSORS EX686B01 Installation And Operating Manual preview
IMI SENSORS EX686B01
Brand: PCB Piezotronics Pages: 59

Brands by name

Popular brands

Load more brands