45
The following are available for image quality.
SFA/SFB:
Top quality (SUPER FINE)
FQA/FQB:
High quality (FINE)
NQA/NQB:
Standard quality (NORMAL)
EXA/EXB:
Low quality (EXTENDED)
**A is suitable for less dynamic images.
**B is suitable for more dynamic images.
The following are available for recording duration (only
event pre-recording and event post-recording).
1 - 10 s (in 1 second intervals)/20 s/30 s/1 - 10 m (in
1 minute intervals)/20-60 m (in 10 minutes intervals)
MANUAL:
Recording duration will be as follows
depending on the event type.
• At a terminal alarm occurrence: During the sup-
ply of a signal
• At a video loss occurrence: During a video loss
occurrence
• At a command alarm: For 8 seconds
• At a motion detection: For 8 seconds
CONTINUE:
Recording will not stop unless the [ALARM
RESET] button on the front panel of the unit is
pressed or the [ALARM RESET] button in the status
display area is clicked.
Notes:
• When performing event pre-recording from a camera
channel that does not have its own event pre-record-
ing area, recording time of pre-recording will differ
depending on the settings of "Resolution" and
"Recording Rate and Quality" for event pre-record-
ing. When the set recording time is longer than the
maximum possible recording time, the setting will
not be applied even though the SET button is clicked
in step 4.
• When performing event pre-recording from a camera
channel that has its own event pre-recording area,
recording time of pre-recording will differ depending
on the capacity of recording area, the setting of
"Resolution" and "Recording Rate and Quality" for
event pre-recording. When the set recording time is
longer than the maximum possible recording time,
the setting will not be applied even though the SET
button is clicked in step 4. Refer to the Operating
Instructions (book) for further information about pre-
recording area.
Summary of Contents for WJHD309 - DIGITAL DISK RECORDER
Page 2: ...2...