48
■
Action Mode
Perform the settings for the action mode. Refer to the
Network Operating Instructions (PDF) for further infor-
mation about each mode.
ACT DET (Activity Detection Mode):
Performs only
recording, writing an event log and camera move-
ment to a preset position at an event occurrence.
Other event actions will not be performed.
ALARM (Alarm Mode):
Performs every event action
according to the settings.
■
Camera Action
Performs the settings for camera action for each cam-
era channel at an event occurrence.
REC:
Select ON or OFF to set whether or not to record
images from the selected camera channel.
Auto Copy:
Auto copy is the function to copy recorded
images automatically onto the copy area of the hard
disk or the DVD-RAM disk. Select ON or OFF to
enable or disable the auto copy function.
Preset Position:
Determine whether or not to move the
selected camera to a preset position registered in
advance. Select a preset number registered in
advance. When "- -" is selected, a camera will not
move to a preset position.
Important:
• When "OFF" is selected for "Auto copy" of "Basic
Setup" on "System", the auto copy function will not
work even though "ON" is selected for this setting.
Select "HDD", "COPY 1" or "COPY 2" for "Auto
copy".
• Images recorded (by event pre-recording) in the pre-
recording area on the hard disk will not be copied
automatically.
■
Serial Notice
Select ON or OFF to determine whether to notify an
event occurrence using PS·Data (or RS232C) or not.
■
Alarm Mail Notice
Select ON or OFF to determine whether to send alarm
mail at event occurrence or not.
Refer to page 79 for descriptions of how to use the mail
function such as the settings of the mail server address
and the mail address of the recipient.
■
FTP Alarm Sending
Select ON or OFF to determine whether or not to send
images to the FTP server at an event occurrence.
Refer to the provided Operating Instructions or the
Network Operating Instructions (PDF) for further infor-
mation about the actions at an event occurrence.
Important:
• Refer to the provided Operating Instructions (book)
or the Network Operating Instructions (PDF) for fur-
ther information about the actions at an event occur-
rence.
• It is possible to browse image files (filename.h3r)
transmitted to the FTP server using the viewer soft-
ware. Refer to the Network Operating Instructions
(PDF) for descriptions of how to operate the viewer
software.
Setup Item
Summary of Contents for WJHD309 - DIGITAL DISK RECORDER
Page 2: ...2...
