User management
71
The following procedure is to register information for PCs (hosts) that can access the camera over a network.
Up to 32 hosts can be registered.
1
Click the [User mng.] button on the setup menu.
2
On the sub-menu that appears, click [Host].
This will display the "Host setting" window.
3
Configure the settings for each item.
Refer to “Host settings” table for details about the settings.
4
Click the [Set] button.
Host settings
♦
Initial default
Note:
•
Clicking the [Registration] button does not log out other users.
Hosts
Item
Settings
Description
Host IP address
Address input (Blank
♦
)
Enter the IP address.
•
Enter single-byte numerals in the range of 0 to 255.
•
You can use the "*" special character to represent any
number.
•
"0.0.0.0" or "*.*.*.*" cannot be registered.
Level
LV1
♦
/ LV2 / LV3 / LV4
Specifies the user level.
•
For operations that can be performed at each level, refer to
"User level (page 73)".
Access priority
1
♦
to 16
Specifies the priority sequence for operations when multiple
users are logged in on the recorder at the same time.
Default screen
[Cam.1]
♦
to [Cam.64] / [Cam.1-4]
/ [Cam.5-
8
] / to / [Cam.61-64] /
[Seq]
Specifies the live image display immediately after log in.
•
Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.
•
Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.
•
Selecting [Seq] displays images in a specified sequence.
Camera partitioning
[View/Operate]
♦
/ [View] / [--]
Specifies the scope of control for each camera channel.
•
When [View/Operate] is selected, live/recorded image
display or camera operation can be performed.
•
When [View] is selected, live/recorded image display can be
performed, but camera operation cannot.
•
When [--] is selected, neither live/recorded image display nor
camera operation can be performed.
Important:
•
You must click press the [Set] button to activate settings on the recorder when registering, editing, or deleting hosts.
Summary of Contents for WJND400 - NETWORK DISK RECORDER
Page 73: ...4 ...
