User management
73
Use the following procedure to define which operations can be performed at each user level.
You can specify functions that can be accessed at each user level (LV1/LV2/LV3/LV4).
1
Click the [User mng.] button on the setup menu.
2
On the sub-menu that appears, click [User level].
This will display the "User level Settings" window.
3
Configure the settings for each item.
Refer to “User level settings” table for details about the
settings.
4
Click the [Set] button.
Note:
•
The functions that can be used at each user level are as follows at default.
User level
LV1
: Level of the administrator who can perform all operations for the camera and recorder.
LV2
: High level operator with limits who can view recorder settings and logs and reset alarms.
LV3
: A general operator who can perform playback and monitoring.
LV4
: Operator who can only monitor (playback unavailable).
Summary of Contents for WJND400 - NETWORK DISK RECORDER
Page 73: ...4 ...
