4
8
Checking system/disk information
For checking information about the HDDs and the recorder system.
Displays software and hardware versions, MAC address, serial
number, internal temperature, and Extension unit software version
information.
1
Click the [Setup] button.
2
Click the [Maintenance] button and then click [Product
information].
You can view the capacities and the remaining space available of
the recorder's HDDs and Extension units (Ext.1 to 5). You can also
check the date range of images recorded on the selected HDD.
Refer to the Setup Instructions (PDF file) for more information on the
recorder's HDD. You can also configure settings for operating time
(hour meter) warnings for the HDD.
1
Click the [Setup] button.
2
Click the [Maintenance] button and then click [Disk
information].
This will display the "Disk information" window.
3
Click the [Display] button on the [Disk information]
window.
The capacity, hour meter, and time and date range of images
saved on each HDD are displayed.
System information
Disk information
Summary of Contents for WJND400 - NETWORK DISK RECORDER
Page 73: ...4 ...
