50
Setup items
■
Tree view of the recorders and the cameras
operable using the monitoring system
The names of the recorders and the camera channels
will be displayed. When the icon is clicked, the informa-
tion of the respective device will be displayed on the
right of the window.
■
Monitor System Info.
The name of the monitoring system will be displayed.
Edit the name of the monitoring system.
Click the [Edit] button, and then edit the name of the
monitoring system. To apply the edited name, click the
[OK] button.
■
Recorder Info.
Adding/deletion of a recorder to/from the monitoring
system and edit of the recorder information can be
made.
<Add a recorder to the monitoring system>
Refer to page 12 for how to add a recorder to the moni-
toring system.
<Edit the recorder information>
Click the desired recorder icon, and then click the [Edit]
button. Edit "IP Address", "Name", "Password" or
"Server Port". To apply the edited item, click the [OK]
button.
<Delete the recorder from the monitoring system>
Click the desired recorder icon, and then click the
[Delete] button. Click the [OK] button on the displayed
confirmation window to delete the recorder from the
monitoring system.
■
Camera Info.
Edit of the information and the alarm recording duration
of the selected camera can be made. Click the desired
camera icon, and then click the [Edit] button.
Edit "Name" (up to 12 characters) or "Rec. Duration".
To apply the edited item, click the [OK] button.
Images recorded by the alarm recording will be stored
the "Mpeg" folder in the directory selected in the
"Choose Directory" section on the "Advanced Setup"
window.
Important:
• The same camera channel name cannot be applied
to two or more camera channels when they are con-
nected to the same recorder.
• Before editing "Name" of "Camera Info.", make sure
that images from the camera channel currently edit-
ing are not being displayed.
Rec. Duration:
Select the recording duration of the
alarm recording using this software from among 10 -
999 seconds.
Alarm images recorded by the alarm recording using
this software can be saved on the PC. (The alarm
recording starts when the recorder detects an alarm
occurrence.)
The default is "30" (sec.).
Alarm Recording:
Select a camera channel to be used
for recording when an alarm occurs in the camera
channel respective to the currently selected camera
icon in the tree view on the "Recorder Setup" win-
dow.
The default is "Off".
Important:
• It is impossible to configure/edit the settings of the
current login recorder.
• The alarm recording will start only when being
logged in the recorder.
• Depending on the timing to start recording images,
the first several seconds of the recorded image may
not be played on the RT4Viewer.
