52
Sequential Display Setup (Monitor System Config – Sequential Display Setup)
Configure the settings relating to the sequential display.
Screenshot 1
Select "Sequential Display Setup" under "Monitor
System Config" from the pop-up menu (
☞
page 49).
→
The "Sequential Display Setup" window will be dis-
played.
Step 1
The "Sequential Display Setup" window contains 2 tabs;
the "Normal Sequence" tab and the "My Favorite
Sequence" tab.
On the "Normal Sequence" tab, the settings for the
sequential display using the cameras connected to the
registered recorder can be configured.
On the "My Favorite Sequence" tab, the settings for the
sequential display using the cameras registered as
"favorite" can be configured.
"Total time", "Dwell Time" and "Screen Mode" are the
common settings to be applied to the both of them.
Refer to the following for further information about the
setup items.
Step 2
When completing the settings, click the [OK] button.
