66
■
Sequence Pause
You can pause an active tour or group sequence. When a
group sequence is paused on a monitor, all sequences will
be simultaneously paused on other monitors.
1. Press the SEQ PAUSE*
1
(or PAUSE*
2
) button.
Sequence will be paused.
2. Press the SEQ PAUSE*
1
(or PAUSE*
2
) button again to
restart the sequence.
*
1
WV-CU950/650
*
2
WV-CU360C/CJ
Available operations during sequence pause
• Sequence step forward/backward
You can move the sequence one frame to the next or
previous step by pressing the + or – button.
• Camera control
You can control the camera whose image is being dis-
played on the monitor.
■
Sequence Stop
When a tour or group sequence is stopped, the camera at
the stopped step will be selected. When a group sequence
is stopped on a monitor, all sequences will be simultane-
ously stopped on other monitors.
●
WV-CU950/650
Press the SEQ STOP button while holding down the SHIFT
button.
Sequence will be stopped.
●
WV-CU360C/CJ
Press the STOP button.
Sequence will be stopped.
●
Note
Sequence will also be stopped when you select a camera
during the sequence is activated. Then, the image of
selected camera will be displayed on the monitor.
Summary of Contents for WJSX650 - SWITCHER
Page 99: ...99 ...
