81
Replacing
Consumab
les
8
10
Do not remove the Drum Protective
Cover until step 8.
Gently close the Front Cover.
Place the old OPC Drum Unit inside the
plastic bag and dispose of it according
to your local regulations.
12
Lock the new OPC Drum Unit by turning the
Drum Release Knob clockwise.
Paste one of the enclosed color labels matching
in color with the one on the replaced drum and
attach it to the same position on the new drum.
Align the Green Arrows of the new OPC
Drum Unit with the ones on the machine,
and then insert the OPC Drum Unit into
the machine up to the Black Arrow on
the Drum Protective Cover.
7
ATTENTION
Insert the Toner Waste Container all
the way in until it stops.
11
Toner Waste Container
●
Exercise care not to incline the container, or
toner may spill.
Green Arrows
Black Arrows
Drum Protective Cover
Color Label
Drum Protective Cover
Peel off the Orange Tape.
Remove the Drum Protective Cover.
Drum Release Knob
Carefully insert the new OPC Drum Unit
all the way in until it stops.
9
OPC Drum Unit
Do not touch or turn around the Gear
of OPC Drum Unit.
Gear
Summary of Contents for Workio DP-C305
Page 13: ...Product Overview 13 memo...
Page 89: ...89 Replacing Consumables memo...
Page 91: ...Replacing Consumables 91 memo...
Page 110: ...110 memo...