Replacing Consumab
les
82
ATTENTION
1
●
Do not reuse toner from the Toner Waste Container.
●
Do not use the Cleaner if it is dirty.
●
When the toner adheres to the machine, wipe it off with a cloth.
Replacing Toner Waste Container / Cleaning the LSU Aperture Glass
Open the Front Cover.
Front Cover
Toner Waste Container (old)
●
Exercise care not to incline the container, or
toner may spill.
Always clean the LSU Aperture Glass at the same time the Toner Waste Container is replaced.
2
Open the box and carefully unzip the
plastic bag. Pull the new Toner Waste
Container out of the box and remove
the plastic wrapping (it will be reused
in step 4) covering the new container.
4
Place the old Toner Waste Container
on top of the opened Front Cover.
Cover the old Toner Waste Container
with the plastic wrapping which was
removed in step 2.
3
Pull out the old Toner Waste Container
out of the machine.
5
Place the old Toner Waste Container
inside the box and zip the plastic bag
closed.
Close Plastic Bag
●
For disposal or recycling information, contact
your local authorities or your local waste
officials.
Plastic Wrapping
Plastic Wrapping
Summary of Contents for Workio DP-C305
Page 13: ...Product Overview 13 memo...
Page 89: ...89 Replacing Consumables memo...
Page 91: ...Replacing Consumables 91 memo...
Page 110: ...110 memo...
