Panasonic Workio DP-C305 Service Manual Download

Page: 663 / 920

663

DP-C405/C305/C265

FEB 2008

Ver. 1.1

Caution:

1. Remove the PCMCIA/PC Card Adapter from the PCMCIA/PC Card Slot in Front of the machine.
2. Install the Master Firmware SD Memory Card into the Card Slot in Front of the machine.

Do not install it into the Card Slot on the SC PCB, or the machine will automatically format the SD Card
for the Fax Image Memory.

3. Do not remove the SD Memory Card from the SD Card Slot in Front of the machine, or turn the power

OFF while Updating the Firmware.

<Procedure>

1. Before starting, print the F5/F6 Parameters List (Copy Service Mode F9-03-00).
2. Turn the Power Switch on the Left Side of the machine to the

OFF ( )

position.

3. Install the appropriate Master Firmware SD Memory Card into the Card Slot in Front of the machine.
4. Turn the Power Switch on the Left Side of the machine to the

ON ( I )

position.

5. Press the

“Function”

“Copy”

, and the

“3”

keys simultaneously on the Control Panel.

6. Input the password, and select the

“OK”

button to enter the Service Mode (default password is

00000000

7. Press the

“9”

key on the Control Panel, and then press the

“Start”

key to enter the F9 Service

Mode.

8. Perform the Copy Service Mode F9-07-00 (Update From Card).
9. The firmware is copied into the machine.

If selecting the

“Auto Mode”

, copies all the necessary firmware at once, and after the update is

completed, the machine reboots itself, and returns to standby.

10. Turn the Power Switch on the Left Side of the machine to the

OFF ( )

position.

11. Remove the Master Firmware SD Memory Card from the machine.

12. Turn the Power Switch on the Left Side of the machine to the

ON ( I )

position.

13. Reprogram the F5 & F6 Parameters according to the lists printed in Step 1. above if the settings are

other than factory default.

Caution:

If the unit does not boot up properly in Step 8., refer to Section 3.11.7.

“Firmware Emergency

Recovery”

4. Creating a Master Firmware SD Memory Card using a PC

1. Install the “SD Memory Card Firmware Writing Tool” to your PC.

The “SD Memory Card Firmware Writing Tool” can be downloaded from your sales company’s Web
Site, or the PCC DIC Service Web site. Please refer to the Readme file for additional details.

2. Preparing the Firmware Code

Double click the appropriate Destination Shortcut Batch File, and copy the Firmware Code File on the
CD-ROM to the Firmware Data Folder in your PC, or access onto the Service Web site to download the
latest Tool and Firmware Code. Note that the files in the Archive will be extracted automatically into the
designated folder when the Archived file (.exe) is Double-clicked.

Example:
From:

Destination Shortcut Batch File: D:(CD-ROM Drive) \ xFirmware \ USA.bat
Firmware Code File:

C405_C305_C265_xx_xxxxxxxx_xx.exe

To:

Firmware Data Folder:

C:\ Panasonic \ Panasonic-FUP \ Data

3. Preparing the Master Firmware SD Memory Card

1. Insert the SD Memory Card (128 MB to 4 GB) into the SD Memory Card Slot.
2. Perform the SD Memory Card Firmware Writing Tool.
3. After all firmware codes are copied, remove the SD Memory Card from the Slot.

Panasonic Workio DP-C305, Service Manual

Search results

Summary of Contents for Workio DP-C305

Reviews:

Related manuals for Workio DP-C305

Brands by name

Popular brands