manualshive.com logo in svg

Panasonic Workio DP-C401, Service Handbook

The Panasonic Workio DP-C401 is a high-performance multifunction printer that offers crisp color prints and reliable productivity for businesses. With its advanced specifications and user-friendly interface, accessing the comprehensive product manual becomes hassle-free. Download the free manual from our website to effortlessly optimize your printing experience.

Share
Download
background image

3-138

Chapter 3 Troubleshooting

3. 4. 4. 5  DC140 Analog Monitor (IO Check)

Description  

Monitors the analog value of the A/D converted sensor, by operating each component

(such as C.C). You can temporarily change the output value. You can also check the Input 
Component and Output Component simultaneously.

Procedure

1. Select the "IO Check" tab on the Service Mode screen.
2. Select [

DC140

] on the IO Check screen.

3. The Analog Monitor screen is displayed.

• The Analog Output Component names and the Analog Input Component names are

displayed in the table in the sequence of Chain Link No. together with the Chain Link
No.

• All the status display of the appropriate output components show "Disable" (checking

stopped). Display of the Level column is blank. All the status display of the 
appropriate input components show "Disable". Display of the Input Value column is
blank.

4. Carry out the Output Component Check items.

<Output Component Check>

(1) Select the target components.
(2) Select [Execute] of the Output Component Check.
(3) The corresponding output component of the Main Processor is turned On at an

output level based on the Output Level Value (value specified only for the test).

(4) The PSW changes the status display of output components to "Enable" (Checking in

progress) and displays the Output Level Value received. (Level: 0~1000)

(5) When you want to check several components at the same time, repeat Step 4 - 

<Output Component Check> from (1) to (4). The maximum no. of output

components which can be checked at the same time is 5. When the 5th output
component was instructed for checking, selection of [Execute] becomes invalid.

(6) If you want to stop checking of the target components being selected, select [Stop]

or select [Stop All] to turn Off all the output components.

(7) Turns Off an appropriate output component. The status display of the appropriate

output component selected shows "Disable" The display of the Level becomes
blank.

(8) There are 2 methods to change and check the Output Level of the output component

temporarily. Procedure A uses the Change Output Level Screen by selecting
[Change Output Level].  Procedure B uses [Level+] and [Level-] to add/subtract the
Output Level Value by 1 at a time. Go to Step (9) when using [Change Output
Level]. Go to Step (14) and the subsequent steps when using [Level+] and [Level-].

(9) Select the desired components for changing the Output Level in "Procedure A" and

select [Change Output Level].

(10)The Change Output Level screen is opened.
(11)Input the new Output Level by using the keyboard, select [OK] to close the Change

Output Level screen and display the Analog Monitor screen.

(12) The new output level is added or subtracted for inputting, and the new output level

will be displayed in the level column of output components on the Analog Monitor
screen.  If the output level value input is out of the range, the message "[!] The value
entered is out of the specified range.  Enter the value again." will be displayed on the
Information screen.  (Out of the specified range means that it is out of the Upper and
Lower Limits data range set up in the Main Processor.)

(13)For the subsequent procedures, repeat and check Procedure 4 - <Output Component

Check> from (2) to (12).

(14)Select the desired components for changing the Output Level in Procedure B and

select [Level+] or [Level-].

(15)Adds/subtracts the Output Level Value by 1 at a time. The new output level is added

or subtracted for inputting, and the new output level will be displayed in the Level
column of output components on the Analog Monitor screen.  If the output level
value input is out of the range, the message "[!] The value entered is incorrect.  Enter
the value again." will be displayed on the Information screen.  (Out of the specified
range means that it is out of the Upper and Lower Limits data range set up in the
Main Processor.)

(16)For the subsequent procedures, repeat Procedure 4 - <Output Component Check>

from (2) to (15) (except from (9) to (13)).

5. Select [Close] to return to the IO Check screen after checking of the Analog Monitor has

completed.

The figure uses the screen when both input component and output component are 
selected for execution.

• Other components required for checking the applicable output component of the 

Main Processor are also turned On.

• The components which are turned On only for the limited period of time will be 

automatically turned Off after they were turned On for the specific period of time.

• If the PSW is instructed to turn On a component which cannot be turned On at the 

same time with another component which is already turned On, the component 
previously turned On will automatically be turned Off.  (Last Precedence Control)  
When the component cannot be automatically turned Off, "[!] Unable to check this 
component.  Stop the other output components." is displayed.

Both components status showing either "Disable" or "Enable" can be selected.

Summary of Contents for Workio DP-C401





































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Workio DP-C401

QMS 1660 Operation preview
1660
Brand: QMS Pages: 122
QMS 1660 Reference Manual preview
1660
Brand: QMS Pages: 306
Canon PIXMA MG5600 Series User Manual preview
PIXMA MG5600 Series
Brand: Canon Pages: 4
Oki C3300n Specifications preview
C3300n
Brand: Oki Pages: 1
Canon imageRUNNER 5075 Reference Manual preview
imageRUNNER 5075
Brand: Canon Pages: 502
Cannon imageRUNNER 5075 Support Manual preview
imageRUNNER 5075
Brand: Cannon Pages: 268
Ricoh AP-P2 G188 Field Service Manual preview
AP-P2 G188
Brand: Ricoh Pages: 682
BIXOLON SRP-500 Driver Installation Manual preview
SRP-500
Brand: BIXOLON Pages: 31
Lexmark X860 Brochure & Specs preview
X860
Brand: Lexmark Pages: 8
SPRT SP-POS587 User Manual preview
SP-POS587
Brand: SPRT Pages: 13
ABLE Systems Ap1300 Quick Start Manual preview
Ap1300
Brand: ABLE Systems Pages: 4
Parkside PGG 15 C2 Translation Of The Original Instructions preview
PGG 15 C2
Brand: Parkside Pages: 104
Lexmark X850E - Mfp Setup Manual preview
X850E - Mfp
Brand: Lexmark Pages: 57
Xerox N2125N - DocuPrint B/W Laser Printer Service Manual preview
N2125N - DocuPrint B/W Laser Printer
Brand: Xerox Pages: 335
Oki IP-7900-21 Advanced Operation Manual preview
IP-7900-21
Brand: Oki Pages: 109
Kyocera FS-6025MFP User Manual preview
FS-6025MFP
Brand: Kyocera Pages: 76
SATO CLe RFID Smart Specifications preview
CLe RFID Smart
Brand: SATO Pages: 2
Xerox Nuvera 100 MX Brochure preview
Nuvera 100 MX
Brand: Xerox Pages: 4

Brands by name

Popular brands

Load more brands