27
●
Links between two SX650 Switch Nodes
In general, you can find video links from a matrix switch output to a matrix switch input. These links must cross two
different system domains.
●
Enter Video Links in the WV-ASC970 Admin Console
In the ASC970 Admin Console main menu, select the Routing on the Domain menu. The LINK screen will be acti-
vated. Then enter the video link(s) here in order for the system to perform video routing properly. The following table
is based on the example from on page 20.
ID
Enable
Video Source
Video Destination
Navigation
Unit
Switch
Port
Unit
Switch
Dev Id
Ch
Cost
1
✓
1
SX650
3
1
i-PRO
11
1
1
2
✓
1
SX650
4
1
i-PRO
11
2
1
In the above video link table, operators are able to enable or disable a video link. The system will not use a link that
is disabled.
Also in the above video link table, the destination Unit ID and source Unit ID are the same. They also can be differ-
ent in a multiple domain system.
In the example on page 23, there is no video link in the system, and operators can skip this configuration.
■
Define System Operators
●
System Operators
System operators are also called global operators or system users. In order to seize a system resource, such as a
camera in a foreign domain, the system requires a global operator. When a global operator logs into a system con-
troller, it becomes a global controller.
The global operator is subject to unit partitioning restrictions, where within their domain, she/he will act like a local
super user.
●
Enter Global Operators in the WV-ASC970 Admin Console (Global Database)
In the WV-ASC970 Admin Console main screen, select
Operators
→
Records
on the
Components
menu. The
OPERATORS
screen will be activated. Then, enter the
operator(s)
information into the fields provided. For global
operator(s), you can select one of the four global class levels.
User ID
Password
Priority
Timeout
Name
Class
500
500
2
00:00:00
Global Operator 1
20: Global Level 0
100
123
10
00:00:00
Global Operator 2
20: Global Level 0
●
Enter Operator to Unit Partitioning in the WV-ASC970 Admin Console
In the WV-ASC970 Admin Console main screen, select
Operator
→
Records
on the
Components
menu. The
OPERATORS
screen will be activated. Then, select the
Unit
tab and check the partitioning you want to apply to a
global operator.
