18
Note:
•
If 6. SSID mark, and 7. Traffic mark are not set beforehand in BWC4000 Configuration Tool,
they will be skipped without being displayed.
•
When the Display button is pressed first, the backlight will light. When the Display button is
pressed again or more times after that, the above menus will be displayed and switched (tog-
gled).
[5] Audio mute button
Starts/stops the audio mute.
By holding down the button (for around 5 seconds), the covert mode* can be turned on/off.
Note:
•
Covert mode: A function that temporarily turns off the LED and LCD backlight.
•
To use the convert mode, you need to set it beforehand using BWC4000 Configuration Tool.
[6] Multi function button
A function can be assigned by setting. Currently, “Classify function” is assigned. The camera has a
“Multi function button” to select the incidents type and also it has button to add the incidents type
to the video data.
* Classify: Identifier for searching for or classify cases
[7] Rec. button
Starts/stops video/audio recording.
To stop the record operation, press and hold the Record button for 2 seconds (default) or more
depending on the setting (2, 3, or 5 seconds).
Note:
•
The buttons other than the Display button are inoperable when the camera is inserted in the
Multi-Dock Charger/Single Dock Charger while powered on.
[8] Bottom terminal
A terminal to be used when charging the camera by setting onto Multi-Dock Charger (WV-BW40D8:
option) or Single Dock Charger (WV-BWC40D1: option). Also, it is used when transferring recorded
data to UDE (Unified Digital Evidence), UEMS (Unified Evidence Management System) or BWC4000
Configuration Tool.
[9] Mount hook
When using any of the following mounting part, use this “Mount hook” to mount on it.
•
Magnet Mount Kit:
ARB-BWC3MNT-MAG
•
MOLLE Vest Dock:
ARB-BWC3MNT-MOLLE
•
Anti-tilt Dock with Spring Clamp: ARB-BWC3MNT-CLAMP
•
Leather Belt Clip:
ARB-BWC3BLTCLIP
•
Leather Belt Loop:
ARB-BWC3BLTLOOP
•
Tag on garment/vest mount dock: ARB-BWCVESTMNT
