background image

3

Safety

• 

This product is a professional equipment.

• 

 : Direct current symbol

• 

Before attempting to connect or operate this product, please read these instructions carefully.

EMC

<WV-BWC4000>

<For U.S.A.>

• 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two con-
ditions: (1) This device may not cause harmful interference, and (2) this device must accept any 
interference received, including interference that may cause undesired operation.

• 

Supplier’s Declaration of conformity
Trade name: 

Panasonic

Model No.: 

WV-BWC4000, WV-BWC40B1

Responsible Party:   Panasonic Corporation of North America 

Two Riverfront Plaza, Newark, New Jersey 07102-5490

Support Contact:  1-800-528-6747

• 

FCC CAUTION: Changes or modifications not expressly approved by the party responsible for 
compliance could void the user's authority to operate the equipment. 

• 

Note: This equipment has been tested and found to comply with the limits for a Class A digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in 
which case the user will be required to correct the interference at his own expense.

• 

The available scientific evidence does not show that any health problems are associated with using 
low power wireless devices. There is no proof, however, that these low power wireless devices are 
absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the 
microwave range while being used. Whereas high levels of RF can produce health effects (by heat-
ing tissue), exposure of low-level RF that does not produce heating effects causes no known 
adverse health effects. Many studies of low-level RF exposures have not found any biological 
effects. Some studies have suggested that some biological effects might occur, but such findings 
have not been confirmed by additional research. [

WV-BWC4000

] has been tested and found to 

comply with FCC radiation exposure limits set forth for an uncontrolled environment and meets the 
FCC radio frequency (RF) Exposure Guidelines.

• 

This product has been tested and meets the FCC RF exposure guidelines when used with the com-
patible mounts supplied or designated for this product. Use of other mounts may not ensure com-
pliance with FCC RF exposure guidelines. Refer to Installation Guide on our web site for further 
information about with the compatible mounts.

Radio

Summary of Contents for WV-BWC4000





























Reviews: