10
10. Mount the camera mounting stage on
the mounting chassis.
Insert the camera mounting stage
1
flanges (3 flanges) into the flange slots
(3 slots) in the camera mounting chas-
sis. Push it into the mounting chassis
as far as it will go.
Once it is inserted into the mounting
2
chassis, rotate it clockwise until it con-
tacts the mounting chassis’s turn stop-
per.
Caution:
If it is difficult to move,
grasp the flanges and legs and
rotate.
Insert and tighten the 3 screws you
3
removed in Step 4. * Refer to <Fig.A>
(Recommended tightening torque:
1.57 N
•
m {1.16 lbf
•
ft})
Insert and tighten the 3 screws you
4
removed in Step 4. * Refer to <Fig.B>
(Recommended tightening torque:
1.57 N
•
m {1.16 lbf
•
ft})
Important:
Do not let the cables be
caught during installation work.
Flanges
Legs
Slots for the camera mounting stage flanges
* 1 position on the rear side
1
1
2
2
3
3
3
2
Turn stopper
* 2 positions
on the rear
side
<Fig. A>
4
4
4
<Fig. B>
