14
14
15
Functions
Outline of functions
Pan/tilt *
Controls the camera direction. The camera will pan or tilt to each direction by pressing
the corresponding dial key.
Zooming control *
It is possible to perform zooming operations of the camera by pressing "*" or "#".
Refresh
Refreshes the camera images by pressing the dial key "5".
Resolution control
Changes the image capture size by pressing the dial key "0".
* Image in the aspect ratio of "4:3(VGA)"
Changes the image capture size between
320x240 (default) and 640x480.
* Image in the aspect ratio of
"4:3(800x600)"
Changes the image capture size between
320x240 (default) and 640x480.
SW395
SC385
* Image in the aspect ratio of "16:9"
Changes the image capture size between
320x180 (default) and 640x360.
Note:
• Some cellular phones cannot change the image capture size even when resolution is
changed by resolution control.
Image quality control
It is possible to change the image quality between "Quality1" and "Quality2"
(
☞
page 9).
Home position *
The camera will move to the home position. (
☞
page 56)
Preset *
The camera will move to the designated preset position to display images by pressing the
dial key corresponding to the desired channel. (The dial key numbers are not displayed
for Preset No 5 or greater. Only preset IDs will be displayed for them.) (
☞
Page 68)
AUX control *
Controls the AUX terminal.
These buttons will be displayed only when "AUX output" is selected for "Terminal 3" on
the setup menu. (
☞
Page 75)
* Only displayed for users whose access level is "1. Administrator" or "2. Camera control" when "On" is selected
for "User auth." . (
☞
page 87)
