Category
Indication
Description
SD memory card
<SD> Format
Successfully formatted the SD memory card.
<SD> Format error
Error occurred when formatting the SD memory card.
<SD> Write-protect ON
(Locked card)
A write-protected SD memory card is inserted.
<SD> Detection error
The SD memory card could not be correctly recognized.
<SD> Write error
An error occurred when writing to the SD memory card.
<SD> Read error
An error occurred when reading from the SD memory card.
<SD> Delete error
An error occurred when deleting data from the SD memory
card.
<SD> File system error
An error occurred in File system of the SD memory card.
<SD> Undefined error
An error other that the ones above has occurred for the SD
memory card.
IMPORTANT
•
In order to be able to correctly use this function, format the SD memory card with the camera before
using it.
•
When using SD memory cards that have been used on other devices such as PCs, the correct
information may not be able to be displayed.
•
Up to 30 SD memory card logs can be saved to the built-in memory of the camera. When the saved
system logs have reached the maximum number, the newer logs will overwrite the older system logs.
Note
•
Refer to our website (http://security.panasonic.com/pss/security/support/info.html) for further
information about the contents of the displayed statuses (relating to the “Viewnetcam.com” service,
the UPnP function, or the self check).
18.4 Reset the settings/Reboot the camera [Default
reset]
Click the [Default reset] tab of the “Maintenance” page. (
®
The settings and the HTML data of the camera can be initialized and reboot of the camera can be performed
on this page.
196
Operating Instructions
18 Maintenance of the camera [Maintenance]
