•
[QVGA] button:
The letters “QVGA” will turn green and images in the main area will be displayed in
QVGA size.
•
[1280x960] button
SW155
SF135
:
The letters “1280x960” will turn green and images in the main
area will be displayed in 1280 x 960 (pixels).
•
[800x600] button
SW152
:
The letters “800x600” will turn green and images in the main area will be
displayed in 800 x 600 (pixels).
•
[640x360] button:
The letters “640x360” will turn green and images in the main area will be displayed
in 640 x 360 (pixels).
•
[320x180] button:
The letters “320x180” will turn green and images in the main area will be displayed
in 320 x 180 (pixels).
•
[1280x720] button
SW155
SF135
:
The letters “1280x720” will turn green and images in the main
area will be displayed in 1280 x 720 (pixels).
Note
•
The buttons [VGA], [QVGA] [1280x960]
*2
and [800x600]
*3
are displayed only when “4:3” is selected
for “Aspect ratio”.
•
The buttons [640x360], [320x180] and [1280x720]
*2
are displayed only when “16:9” is selected for
“Aspect ratio”.
SW155
SF135
:
•
When “1280x960” or “1280x720” is selected for the image capture size, it may become smaller
than the actual size depending on the window size of the web browser.
*2
[Image quality] buttons
These buttons will be displayed only when a JPEG image is displayed.
•
[1] button:
Images in the main area will be displayed in accordance with the setting for “Quality1” of
“Image quality setting”.
•
[2] button:
Images in the main area will be displayed in accordance with the setting for “Quality2” of
“Image quality setting”.
[Zoom] buttons
Images will be zoomed in on with the electronic zoom by the viewer software “Network Camera View
4S”.
•
[x1] button:
The letter “x1” will turn green and images in the main area will be displayed at x1.
•
[x2] button:
The letter “x2” will turn green and images in the main area will be displayed at x2.
•
[x4] button:
The letter “x4” will turn green and images in the main area will be displayed at x4.
[Brightness] buttons
*4
SW155
SW152
SF135
: The brightness is adjustable from 0 to 255.
SF132
: The brightness is adjustable from 0 to 127.
•
(darker) button:
The displayed image will be darker.
•
button:
The adjusted brightness will return to the default brightness (64).
•
(brighter) button:
Image will be brighter.
Note
•
In the following situations, the brightness may not change even if the [Brightness] button is
clicked.
–
when capturing images of bright subjects, such as outdoor subjects
–
when "Light control mode" is set to "Indoor scene"
SF132
:
–
when "Fix shutter" is set to "1/2000 fix"
[Rec. on SD] button
*4
SW155
SW152
This button will be displayed only when “Manual” is selected for “Save trigger” on the setup menu.
(
®
page 42)
10
Operating Instructions
1 Monitor images on a PC
