16 Configure the settings of the servers
[Server]
The settings relating to the mail server, the FTP server and the NTP server can be configured on this page.
The “Server” page has 3 tabs; the [Mail] tab, the [FTP] tab and the [NTP] tab.
16.1 Configure the settings relating to the mail server
[Mail]
Click the [Mail] tab on the “Server” page. (
®
page 32, page 34)
The settings relating to the mail server used to send the alarm mail can be configured on this page.
IMPORTANT
•
When a terminal that receives e-mails is not compatible with UTF-8 encode, it is impossible to receive
alarm mails correctly.
[SMTP server address]
Enter the IP address or the host name of the SMTP server used to send e-mails.
•
Available number of characters:
1 - 128 characters
[SMTP port]
Enter the port number to which e-mails are sent.
•
Available port number:
1-65535
•
Default:
25
The following port numbers are unavailable since they are already in use.
20, 21, 23, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000-61000
[POP server address]
When “POP before SMTP” is selected for “Type”, enter the IP address or the host name of the POP server.
•
Available number of characters:
1 - 128 characters
Operating Instructions
107
16 Configure the settings of the servers [Server]
