IMPORTANT
•
When entering the host name for “FTP server address”, it is necessary to configure the DNS settings
on the [Network] tab of the “Network” page. (
®
page 111)
[User name]
Enter the user name (login name) to access the FTP server.
•
Available number of characters:
1 - 32 characters
[Password]
Enter the password to access the FTP server.
•
Available number of characters:
0 - 32 characters
[Control port]
Enter a control port number to be used for the FTP server.
•
Available port number:
1-65535
•
Default:
21
The following port numbers are unavailable since they are already in use.
20, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000-61000
[FTP mode]
Select “Passive” or “Active” for the FTP mode.
Normally, select “Passive”. When it is impossible to connect after select “Passive”, try to connect after selecting
“Active”.
•
Default:
Passive
16.3 Configure the settings relating to the NTP server
[NTP]
Click the [NTP] tab on the “Server” page. (
®
page 32, page 34)
The settings relating to the NTP server such as the NTP server address, port number, etc. can be configured
on this page.
IMPORTANT
•
Use an NTP server when the more accurate time & date setting is required for the system operation.
Operating Instructions
109
16 Configure the settings of the servers [Server]
