•
Access permission:
Users whose access level is set to 2 and 3 on the “User auth.” tab
(
®
page 102) can access the camera only in the period of schedule.
•
H.264 recording
SW155
SW152
:
The SD recording will be performed at the designated time in the
schedule.
Note
•
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (
®
page 102) and “Off” for
“Host authentication” on the “Host auth.” page (
®
page 103) to validate “Access permission”.
SW155
SW152
:
•
When selecting “H.264 recording”, select “H.264” for “Recording format” on the [SD memory
card] tab and select “Schedule” for “Save trigger”. (
®
page 42)
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
148
Operating Instructions
18 Configure the settings relating to the schedules [Schedule]
