•
Available number of characters:
1 - 8 characters
Note
•
When “H.264” is selected for “Recording format”, the name of the saved file will be given automatically.
•
When “FTP error” is selected for “Save trigger”, the file name entered for “File name” on the [FTP img.
trans.] tab of the “Network” page will be used for the file name of the image saved on the SD memory
card.
[Image saving interval/Number of images to be saved - Image saving interval]
When “Alarm input” or “Manual” is selected for “Save trigger”, select an interval (frame rate) of saving images
on the SD memory card from the following.
0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps
•
Default:
1fps
[Image saving interval/Number of images to be saved - Number of images to be saved]
Select a number of alarm images to be saved on the SD memory card from the following.
10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 2000pics/ 3000pics
•
Default:
100pics
Note
•
When “H.264” is selected for “Recording format”, Pre alarm and Post alarm can be set on “H.264
recording” of [Alarm] tab.
•
“Number of images to be saved” can be configured only when “Alarm input” is selected for “Save
trigger”.
[Image capture size]
When “Manual” is selected for “Save trigger” and “JPEG” is selected for “Recording format”, select the image
capture size of the images to be saved on the SD memory card from the following.
When “4:3” is selected for “Aspect ratio”
QVGA /VGA/ 1280x960
SW155
QVGA/ VGA/ 800x600
SW152
When “16:9” is selected for “Aspect ratio”
320x180/ 640x360/ 1280x720
SW155
320x180/640x360
SW152
•
Default:
VGA
Note
•
When “FTP error” is selected for “Save trigger”, images will be saved with the image capture size
selected on the [FTP img. trans.] tab of the “Network” page.
•
When “H.264” is selected for “Recording format”, select the image capture size for “H.264 recording”
- “Image capture size” on the [SD memory card] tab.
•
When “Alarm input” is selected for “Save trigger”, images will be saved with the image capture size
selected on the [Alarm] tab of the “Alarm” page.
H.264 recording
This setting is available only when “H.264” is selected for “Recording format” of the SD memory card.
When the second [Set] button on the "Setup" page is clicked, the settings for “H.264 recording” will be displayed
on the bottom of the tab.
[Image capture size]
Select the image capture size from the following.
When “4:3” is selected for “Aspect ratio”
Operating Instructions
45
10 Configure the basic settings of the camera [Basic]
