QVGA /VGA
When “16:9” is selected for “Aspect ratio”
320x180/ 640x360
•
Default:
VGA
[Recording priority]
Select “Constant bit rate” or “Frame rate” for the H.264 recording mode.
•
Constant bit rate:
H.264 images will be recorded with the bit rate selected for “Max bit rate”.
•
Frame rate:
H.264 images will be recorded with the frame rate selected for “Frame rate*”.
•
Default:
Frame rate
[Frame rate*]
Select the frame rate for images to be recorded from the following.
1fps/ 3fps/ 5fps*/ 7.5fps*/ 10fps*/ 12fps* (E model)/ 15fps*/ 20fps*/ 30fps*
•
Default:
30fps*
Note
•
When “Frame rate” is selected for “Recording priority”, this setting is available.
•
“Frame rate*” is restricted by “Max bit rate”. For this reason, the frame rate may be lower than the
specified value when any value marked with an asterisk (*) is selected.
[Max bit rate]
Select the bit rate for images to be recorded from the following.
64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 2048kbps/ 3072kbps/
4096kbps
•
Default:
1536kbps
[Image quality]
Select the quality for H.264 images to be recorded from the following.
Low(Motion priority)/ Normal/ Fine(Image quality priority)
•
Default:
Normal
Note
•
When “Constant bit rate” is selected for “Recording priority”, this setting is available.
[Refresh interval]
Select an interval (I-frame interval; 0.2 - 1 second) to refresh the H.264 images to be recorded from the
following.
0.2s/ 0.25s/ 0.33s/ 0.5s/ 1s
•
Default:
1s
SD memory card information
[Remaining capacity]
Total capacity and remaining capacity of the SD memory card will be displayed.
Depending on the status of the SD memory card, the size indications will differ as follows.
Indication
Description
--------KB/--------KB
No SD memory card is inserted. Failed to obtain available capacity
due to error, etc.
********KB/********KB
The SD memory card is unformatted, or locked, etc.
46
Operating Instructions
10 Configure the basic settings of the camera [Basic]
