•
Default:
–
Camera control: All are checked
–
Live only: All are not checked
–
Guest User: All are not checked
Note
•
If you have set “User authentication” to “Off”, and “Guest User” to “Not use”:
The “Access Level” item cannot be set. And, while all the live operation buttons are displayed, the
[Setup] buttons require authentication.
•
If you have set “User authentication” to “Off”, and “Guest User” to “Use”:
You can set the items for “Guest User”.
•
If you have set “User authentication” to “On”:
You cannot set the items for “Guest User”.
You can set the following functions.
Live view selectable
Selecting an image displayed in the live view setting permissions
Refresh Rate
JPEG format image refresh interval setting permissions (
®
Snap shot
Snap shot operation permissions (
Playback of recording (Log
disp.)
Log operation permissions (
®
Manual rec./Delete rec.
SD memory card save/delete permissions (
®
Brightness
Brightness setting permissions (
2.7.2 Configure the settings relating to the host authentication
[Host auth.]
Click the [Host auth.] tab on the “User mng.” page. (
®
For menu display and how to operate, refer to
page 34, page 34)
The restriction settings of PCs (IP address) from accessing the camera can be configured on this page.
[Host auth.]
Select “On” or “Off” to determine whether or not to authenticate the host.
Operating Instructions
113
2 Settings
