•
Auto1(Normal):
The camera automatically switches between the color mode and the black & white mode
in accordance with the picture brightness (luminance).
•
Auto2(IR Light):
The camera automatically switches between the color mode and the black & white mode
in accordance with the picture brightness (luminance). Suitable when using near-infrared lighting at night.
•
Auto3(SCC):
Suitable to keep the color mode even under darker light condition. The Super
ChromaCompensation (SCC) function retains the color mode even with dim lighting.
•
Default:
Auto1(Normal)
Super Chrome Compensation (SCC) function
This function achieves faithful color images using the proprietary color compensation technology that
reproduce images even under low illumination where it is usually difficult to capture objects faithfully.
IMPORTANT
•
If the focus cannot be automatically adjusted, refer to “2.5.4.3 Adjust the zoom and focus [WV-U2542L]
[WV-U2532L] [WV-U1542L] [WV-U1532L] [WV-U2142L] [WV-U2132L] [WV-U1142] [WV-U1132]”.
[WV-U2542L] [WV-U2532L] [WV-U1542L] [WV-U1532L] [WV-U2142L] [WV-U2132L] [WV-U1142]
[WV-U1132]
Note
•
Since the color compensation technology is used for “Auto3(Super Chrome Compensation(SCC))”,
some colors may look different from the actual objects depending on the light condition (such as when
infrared lights are used).
•
The operating sound might be heard when changing to black-and-white mode, however it does not
indicate any malfunction.
•
The color mode and the black & white mode may not be switched automatically depending on the
environment. In such a case, use the schedule function to switch the color and the black & white mode.
For how to set up, refer to the following our support website.
https://security.panasonic.com/training_support/support/info/ <Control No.: C0314>
[Level]
Select the threshold illuminance level (brightness) to switch between the color mode and the black & white
mode. The descriptions about the following threshold illuminance levels are given when “Off” is selected for
“Super Dynamic(SD)”.
•
High:
Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 2 lx or less.
•
Low:
Switches from the color mode to the black & white mode when the ambient brightness (illuminance)
of the camera is approx. 1 lx or less.
•
Default:
High
Note
•
When a low value is selected for “Maximum gain”, it may be difficult to switch modes depending on the
environment.
[Dwell time]
Select a wait time for switching between the color mode and the black & white mode from the following.
2s/ 10s/ 30s/ 1min
•
Default:
10s
[IR LED light intensity]
U254x
U253x
U214x
U213x
U154x
U153x
Select the IR LED light intensity from High/Middle/Low.
•
Default:
High
Operating Instructions
77
2 Settings
