•
Digest or Basic:
Uses “Digest or Basic” authentication.
•
Digest:
Uses “Digest” authentication.
•
Basic:
Uses “Basic” authentication.
•
Default:
Digest
Note
•
To enhance the security, it is recommended to select “Digest” for “Authentication method”. If “Digest
or Basic” or “Basic” is selected, leakage of the user name and the password may occur.
•
When the [Authentication] setting has been changed, close the web browser, and then access the
camera again.
•
About the system devices (our network disk recorder and others)
For the model No. and the firmware version of applicable products, refer to the following our support
web site.
https://security.panasonic.com/training_support/support/info/ <Control No.: C0701>
[User name registration]
At the time of new registration, register a new user name in [User name]. Click [
] in “User name
registration” to view registered users. Registered users are displayed as “Registered user name [Access
level]”. (Example: admin [1])
If you click the [Change] button on the right, the selected user will be displayed in [User name], and you can
change the password. By clicking the [Delete] button on the right, you can delete the selected user.
[User name (1 to 32 characters)]
Enter a user name.
•
Available number of characters:
1 - 32 characters
•
Unavailable characters:
" & : ; \
•
Default:
None (blank)
Note
•
When the user name already in use is entered and the [Set] button is clicked, the respective user
information will be overwritten.
[Password (8 to 32 characters)] [Retype password]
Enter a password.
•
Available number of characters:
8 - 32 characters
•
Unavailable characters:
" &
•
Default:
None (blank)
Note
•
Distinguish between upper- and lower cases.
•
For the password, use three or more types of characters from upper- and lowercase alphabetic
characters, numeric characters, and symbols.
•
Set the password which does not include the user name.
[Access Level]
Select the access level of the user from the following.
•
1. Administrator:
Allowed all available operations of the camera.
•
2. Camera control:
Allowed to control the camera. Functions selected for “Access level” can be operated.
•
3. Live only:
Allowed to display live view. Functions selected for “Access level” can be operated.
•
Default:
3. Live only
[Access level]
Select the available functions based on the user access level (camera control, live view, guest user).
112
Operating Instructions
2 Settings
