2.8.2.6 Configure the settings relating to SNMP
The settings relating to SNMP can be configured on this page. It is possible to check the status of the camera
by connecting to the SNMP manager. When using the SNMP function, contact the network administrator.
[SNMP version]
Select the SNMP version to be used.
•
SNMPv1/v2:
SNMPv1/v2 is activated.
•
SNMPv3:
SNMPv3 is activated.
•
SNMPv1/v2/v3:
SNMPv1/v2/v3 is activated.
•
Default:
SNMPv1/v2
[SNMPv1/v2] - [Community]
Enter the community name to be monitored.
•
Available number of characters:
0 - 32 characters
•
Default:
None (blank)
IMPORTANT
•
When using the SNMP function with SNMPv1/v2, it is necessary to enter a community name. When
no community name is entered, the SNMP function will not work. Do not set a community name that
can easily be guessed. (Example: public)
[SNMPv3] - [User name]
Set the SNMPv3 user name.
•
Available number of characters:
Empty field or 1 - 32 characters
•
Unavailable characters:
" & : ; \
[SNMPv3] - [Authentication]
Select the SNMPv3 authentication method from MD5 or SHA1.
•
Default:
MD5
[SNMPv3] - [Encryption method]
Select the SNMPv3 encryption method from DES or AES.
•
Default:
DES
Operating Instructions
133
2 Settings
