When “On” is selected for “User auth.”, the authentication window will be displayed before displaying
live images for the user name and password entries.
IMPORTANT
•
When the camera is accessed using the HTTPS protocol, the refresh interval and frame rate of
images may be lower.
2.8.5.1 Install the security certificate
When the security certificate of the camera to access is not installed on the PC, the security alert window will
be displayed each time the camera is accessed using the HTTPS protocol. To have the security alert window
not displayed, it is necessary to install the security certificate in the following procedure. If the certificate is not
installed, the alert window will be displayed each time the camera is accessed.
Note
•
The security certificate is installed on the PC with the information registered for “Common Name”.
Therefore, the information registered for “Common Name” must be same as the address or host name
for the camera access. If the certificate is not the same, the security alert window will be displayed
each time the camera is accessed.
•
When the address or host name of the camera is changed, the security alert window will be displayed
each time the camera is accessed even if the security certificate is installed. Install the security
certificate again.
•
When the camera access is open to the Internet, enter the address name or host name to access via
the Internet for “Common Name”. In this case, the security alert window will be displayed each time
the camera is locally accessed, even if the security certificate is installed.
•
When the security certificate is properly installed, a key icon is displayed in the address box of the web
browser that has accessed the camera.
1.
Access the camera using the HTTPS protocol.
2.
When the security alert window is displayed, click “More information” and click “Go on to the Webpage
(not recommended)”.
→
The “Live” page will be displayed. If an authentication window is displayed, enter the user name and
password.
Note
•
If this window is displayed when accessing a device other than the camera or a website, a security
problem may have occurred. In this case, check the system status.
144
Operating Instructions
2 Settings
