Note
•
Refer to the supplied “Installation Guide” for more information about initializing the network settings
(
•
If “Diag.” of the alarm or e-mail notification function is selected, a notification of error will be sent to
“Destination E-mail address” or to “Destination of notification” when an error such as no SD memory
card insertion after the reboot occurs. (
®
2.10.5 Settings data/backing up or restoring logs [Data]
Click the [Data] tab of the “Maintenance” page. (
®
For menu display and how to operate, refer to page 34,
page 34)
The settings related to backing up or restoring settings data, and saving logs can be configured in this section.
Backup
[Setup data]
Click the [Execute] button to backup the setup data of the camera to a PC.
[Scene file]
Click the [Execute] button to backup the scene files of the camera to a PC.
[Logs]
Click the [Execute] button to backup the log data of the camera to a PC.
IMPORTANT
•
When backing up settings or logs, creating the backup files takes time.
•
When the backup operation takes 10 minutes or more, a communication timeout may occur. In this
case all of the backup data may not be obtained. Therefore, we recommend completing backup
operations within 10 minutes. It is also possible to check whether or not the correct data was obtained
by restoring the obtained data (excluding log data).
168
Operating Instructions
2 Settings
