Note
•
The operations button displayed on the mobile terminal screen may not be available depending on
the user rights and access level of the accessing user. To display the operations button, it is
necessary to set the user rights and access level (“User auth.” in “User mng.”). (
2.
Click the button of the function that you want to operate.
B
Resolution control
The resolution can be changed by selecting a resolution setting from the buttons.
Images are displayed in the image capture size selected in “JPEG(1)” or “JPEG(2)” of [JPEG] on the
[Image] tab.
However, the images of the image capture size of “2560
´
1440”
U154x
U254x
U114x
U214x
cannot be displayed.
Note
•
You can change the image size displayed on the mobile terminal by accessing the following addresses.
–
Large display: http://IP address/cam/dl
–
Medium display: http://IP address/cam/dm
–
Small display: http://IP address/cam/ds
•
When the resolution is changed by the resolution control, the displayed resolution changes but the
image size remains the same.
•
When the HTTP port number is changed from “80”, enter “http://IP address: (colon) + port number/
cam”
in the address box of the browser. When using the DDNS function, access to “http://Host name
registered in the DDNS server: (colon) + port number/cam”
.
•
When “HTTPS” is selected for “HTTPS” - “Connection” on the [Advanced] tab of the “Network” page,
enter as follows.
“https://IP address: (colon) + port number/cam” or “https://Host name registered in the DDNS server:
(colon) + port number/cam”
•
When the authentication window is displayed, enter the user name of an administrator or user and
password. Depending on the mobile terminal in use, password entry may be required each time the
screen is switched.
•
Depending on the mobile terminal in use, larger size images may not be displayed. In this case,
selecting a setting close to the lowest quality setting for “Image quality setting” of “JPEG” (
64) may sometimes solve this problem.
Operating Instructions
17
1 Operations
